Free Guide to Daily Hearing Aid Care and Cleaning

Understanding Your Hearing Aid Components and How They Work

Hearing aids are small electronic devices made up of several important parts that work together to help you hear better. Understanding what each component does makes it easier to care for your device properly. The microphone picks up sounds from your environment and converts them into electrical signals. The amplifier then increases the strength of these signals so they're loud enough for you to hear. The receiver (also called a speaker) converts the amplified electrical signals back into sound and delivers it into your ear canal.

Get Your Free Mammogram Appointment Information Guide →

The battery powers all of these components. Most hearing aids use zinc-air batteries that are activated when you remove a small tab from the battery door. Some newer models use rechargeable lithium-ion batteries instead. The hearing aid's casing, typically made from plastic or acrylic, houses all these parts and protects them from damage. Inside the casing, you'll find a circuit board with microchips that process sound and adjust settings based on your specific hearing needs.

Behind-the-ear (BTE) hearing aids sit on top of your ear with a thin tube running into your ear canal. In-the-ear (ITE) devices fit entirely within your ear. Completely-in-the-canal (CIC) aids are the smallest option. Receiver-in-the-canal (RIC) models have the speaker positioned in the ear canal rather than in the main body. Each style has different care requirements, though the basic cleaning and maintenance principles remain similar across all types.

Practical takeaway: Spend time learning the parts of your specific hearing aid model. Check your user manual to identify where the microphone, battery door, volume control, and program button are located. This knowledge helps you understand why certain areas need regular cleaning and how to handle your device safely.

Daily Cleaning Techniques That Protect Your Investment

Daily cleaning is the most important habit you can develop to keep your hearing aids working properly. Every day, your ears produce wax, moisture, and skin oils that accumulate on your hearing aid. Sweat, dust, and environmental debris also build up on the device. If not removed, this buildup can block the microphone or receiver, reducing sound quality or causing the device to stop working altogether. The good news is that daily cleaning takes only a few minutes and uses simple, inexpensive tools.

Learn About Scheduling Utah DMV Appointments →

Start your cleaning routine each morning or evening when you remove your hearing aids. Use a soft, dry cloth—like microfiber or a lens cloth—to gently wipe down the entire surface of each device. Pay special attention to the microphone openings, which are usually small holes on the top or side of the device. Wipe around the battery door and any buttons or controls. For behind-the-ear models, also clean the earmold (the part that goes in your ear) and the tubing. Use gentle circular motions rather than rubbing back and forth, which can push debris deeper into the device.

Cerumen removal tools are small, specialized implements designed specifically for hearing aid cleaning. These tools typically have a small brush on one end and a curved wire loop on the other. The brush can sweep away loose wax and debris from the microphone ports and the surface of the device. The wire loop is designed to gently remove wax from the receiver opening or earmold tubing without damaging the delicate components inside. Many hearing aid providers include these tools with your device, or they're available for purchase at drugstores and online retailers for just a few dollars.

Never use water, alcohol, or cleaning solutions on your hearing aids unless your specific model is labeled as water-resistant. Moisture can damage the circuit board and battery connections inside. Don't use tissues or paper towels to clean your devices, as small fibers can get caught in the microphone openings. Avoid using your fingernails to remove wax, which can scratch the surface and damage delicate parts. Store your cleaned hearing aids in a cool, dry place overnight, away from direct sunlight and heat sources like radiators or heating vents.

Practical takeaway: Create a simple cleaning kit and keep it in one place. Include a microfiber cloth and cerumen removal tool. Set a reminder on your phone to clean your hearing aids at the same time each day—many people choose to do this right before bed so the devices dry overnight.

Managing Moisture and Preventing Water Damage

Moisture is one of the biggest threats to hearing aid longevity. Even though most hearing aids are not waterproof, exposure to moisture happens in many situations beyond just swimming or showering. Humidity in the air, perspiration from your skin, rain, and even the moisture in your ear canal can gradually damage your device's internal components. Understanding where moisture comes from and how to minimize exposure helps prevent costly repairs.

How to Create Your First YouTube Channel →

Always remove your hearing aids before showering, bathing, or swimming. Water can enter through the microphone ports or battery door and reach the circuit board, causing corrosion and component failure. If you accidentally get your hearing aid wet, remove the battery immediately, open the battery door, and let both the device and battery dry completely before reinserting the battery. Don't attempt to speed up drying with a hair dryer on high heat, as this can damage plastic components. Instead, leave the device in a warm, dry room for at least 24 hours.

Sweat is a significant source of moisture exposure, particularly if you wear your hearing aids during exercise or in warm climates. Wipe away visible sweat from your device several times throughout the day if you're active. Some people find it helpful to wear a sweatband or hat during workouts to reduce sweat exposure. In humid environments, store your hearing aids in a dry location with a desiccant container—a small container with moisture-absorbing material that removes excess humidity from the air around your devices. These containers are inexpensive and reusable; you can restore the desiccant by heating it in an oven according to the package instructions.

Cerumen (earwax) naturally contains moisture, so regular earwax cleaning is part of moisture management. If excess wax accumulates on your earmold or in the tubing, it traps moisture against the device surface. During particularly humid seasons or if you have excessive earwax production, increase your cleaning frequency to twice daily. Some people also find that storing their hearing aids in an electric dehumidifier overnight provides extra protection. These devices cost between $20 and $50 and use gentle heat or absorption methods to remove moisture without exposing your hearing aids to excessive temperature changes.

Practical takeaway: Create a pre-shower routine. Set your hearing aids in a designated dry spot at least 15 minutes before showering. This gives you a consistent reminder and ensures you never accidentally expose your device to water. Keep a desiccant container on your nightstand for overnight storage.

Battery Care and Troubleshooting Common Power Issues

Proper battery care directly impacts how long your hearing aids work each day and how often you need to replace batteries. Zinc-air batteries, the most common type, activate when you peel off a small adhesive tab. Before you're ready to use a battery, the tab keeps air away from the battery's zinc surface, which prevents the battery from draining. This means unused batteries can last several years if stored properly in a cool, dry place. Once you remove the tab, the battery typically lasts between 3 to 22 days depending on battery size and your device's power consumption.

Your Free Guide to Vermont DMV Appointments →

Battery sizes are standardized across manufacturers and labeled by color. Size 10 (yellow tab) is the smallest and used in completely-in-canal devices; it lasts 3 to 7 days. Size 312 (brown tab) works with many in-the-ear models and lasts 7 to 10 days. Size 13 (orange tab) fits many behind-the-ear models and lasts 10 to 14 days. Size 675 (blue tab) is the largest and used in powerful hearing aids; it lasts 14 to 22 days. Buying batteries in bulk from discount retailers or online stores often costs less than purchasing them individually from hearing aid clinics.

Several warning signs indicate your battery is running low. You might notice that your hearing aid produces feedback (a whistling sound) or sounds quieter than usual. The device may turn off suddenly during the day when it worked all morning, or it might be slow to turn on. If you experience any of these issues, try inserting a fresh battery before assuming something is wrong with your device. Some people set a calendar reminder to change batteries on the same day each week, which makes it easier to remember and prevents you from running out of power unexpectedly.